P0335 код неисправности. Диагностика кодов неисправностей двигателя Н4М.
P0335
Датчик положения коленчатого вала.
DTC 0335h – Crankshaft Position Sensor.
Fault Type | Description | ABC Type | |
64h | Plausibility Failure | Vbx_clf | |
62h | Two (or More) Input Parameters compared for Plausibility | Vbx_clf | |
38h | Incorrect Number of Cycles in a Given Time Period | Vbx_clf | |
31h | Signal Not Detected | Vbx_clf | |
Detection Conditions for Bit 4 (readiness) | |||
64h | Engine running AND no DTC present linked to camshaft and crankshaft sensors | ||
62h | Engine speed > C_N_32_MAX_DIAG_CRK_TOOTH AND no DTC present linked to camshaft and crankshaft sensors | ||
38h | Engine running AND no DTC present linked to crankshaft or camshaft sensors | ||
31h | Engine running AND no DTC present linked to camshaft and crankshaft sensors | ||
Detection Conditions for Bit 0 (test failed) | Detection timing | Resorption Timing | |
64h | Reference gap not detected at correct position +/- > 2 teeth | < 1s | < 1s |
62h | Abnormal number of teeth per crankshaft revolution, until +/- 2 teeth | < 1s | < 1s |
38h | Noisy crankshaft signal | < 1s | < 1s |
31h | Crankshaft sensor signal is missing | < 1s | at next driving cycle |
Specific Snapshot:
$2010 – Engine status;
$2014 – Camshaft/crankshaft synchronization state;
$2016 – Crankshaft synchronization state;
$2161 – Crankshaft signal;
$2162 – Counter of loose of crankshaft synchronization.