Great Wall Body Electric Apparatus (2010-4G69-2.5TCI-4D20 Left Hand Drive, H3 Shifted to H5 Interior Trim).
Great Wall Body Electric Apparatus (2010-4G69-2.5TCI-4D20 Left Hand Drive, H3 Shifted to H5 Interior Trim).
Перейти к разделу:
Function Chart for Numbered Pins of Intermediate Connection of Wire Harness.
Headlamp (H3 Shifted to H5 Interior Trim).
Relationship between Wiring Harnesses and Connector Connection Number Chart.
Function Chart for Numbered Pins of Intermediate Connection of Wire Harness.
[2010 Gasoline Model I].
[2010 Gasoline Model II (difference between II and I)].
Diesel Model (difference with 2010 Gasoline Model I).
Headlamp (H3 Shifted to H5 Interior Trim).
Relationship between Wiring Harnesses and Connector Connection Number Chart.
Combination Headlamp Assembly.
Replace.
1. Seperate the wire connectors of the battery negative pole;
2. Remove the front bumper and grill;
3. Unscrew the four bolts securing the combination headlamp, seperate the wire connectors of the combination headlamp, and remove the combination headlamp assembly.
4. Remove high-beam (Figure 2) and low-beam (Figure 1) bulbs
(a) Rotate the sealing cover counterclockwise;
(b) Pull out the plug;
(c) Press the circlip securing the bulb, and remove the bulb
5. Remove the front position lamp bulb
(a) Rotate the sealing cover counterclockwise (Figure 2);
(b) Pull the bulb out from the bulb socket.
6. Remove the front turn light bulb
(a) Rotate front turn light bulb socket counterclockwise (Figure 3);
(b) Press the bulb and rotate counterclockwise, to remove it from the bulb socket.
7. Remove the bulb of daytime running lamp
(a) Rotate daytime running lamp socket counterclockwise (Figure 4);
(b) Press the bulb and rotate counterclockwise, to remove it from the bulb socket.
8. Mount the combination headlamp assembly The mounting order is opposite to the removal order.
Adjustment.
For headlamp aiming adjustment, adjustment of headlamp adjusting screw can help to adjust the headlamp light point.
1. Position A refers to the left-right adjusting screw hole of low beam. Rotate the screw hole clockwise to turn the low beam rightward with a crosshead screwdriver, otherwise, leftward;
2. Position В refers to the up-down adjusting screw hole of low beam. Rotate the screw hole clockwise to turn the low beam downward with a crosshead screwdriver, otherwise, upward;
3 Position C refers to the left-right adjusting screw hole of high beam. Rotate the screw hole clockwise to turn the high beam rightward with a crosshead screwdriver, otherwise, leftward;
4 Position D refers to the up-down adjusting screw hole of high beam. Rotate the screw hole clockwise to turn the high beam downward with a crosshead screwdriver, otherwise, upward;
Front fog lamp assembly.
Replace.
1. Seperate the wire connectors of the battery negative pole;
2. Remove the front bumper, and seperate the front fog lamp wire connector;
3. Remove the fog lamp decorative cover;
4. Unscrew the three screws securing the front fog lamp, and then remove the front fog lamp from the front bumper;
5. Remove the front fog lamp bulb.
Rotate the bulb socket counterclockwise, and remove the front fog lamp bulb;
6. Mount the front fog lamp assembly.
The mounting order is opposite to the removal order.
Rear Combination Lamp Assembly.
Replace.
1. Seperate the wire connectors of the battery negative pole;
2. Remove the four retaining bolts, seperate the wire connectors of rear combination lamp, and remove the upper and lower rear combination lamp assemblies;
3. Remove bulbs of the rear position lamps, brake lamps, rear turn lights and backup lamps
(a) Rotate the bulb socket counterclockwise;
(b) Rotate the bulb off from the lamp socket;
4. Mount the rear combination lamp assembly.
The mounting order of rear combination lamp is opposite to the removal order.
Rear fog lamp assembly.
Replace.
1. Seperate the wire connectors of the battery negative pole;
2. Remove the rear bumper, and seperate the rear fog lamp wire connector;
3. Unscrew the three screws securing the rear fog lamp, and then remove the rear fog lamp from the rear bumper;
4. Remove the bulb.
(a) Rotate the bulb socket counterclockwise;
(b) Rotate the bulb off from the lamp socket;
5. Mount the rear fog lamp assembly.
The mounting order is opposite to the removal order.