Меню Закрыть

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Перейти к разделу:

Function Chart for Numbered Pins of Intermediate Connection of Wiring Harness.

Engine Electronic Control System.

Automatic Transmission.

ABS System.

ESP System.

TOD.

Airbag Electronic Control System.

Instrument Cluster.

Relationship between Wiring Harnesses and Connector Connection Number Chart.

BCM.

Cruise Control System.

CD1085.

DVD109 and DVD110.

DVD111.

Function Chart for Numbered Pins of Intermediate Connection of Wiring Harness.

Great Wall Body Electric Apparatus (K5-N2).

Engine Electronic Control System.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Automatic Transmission.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

ABS System.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

ESP System.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

TOD.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Airbag Electronic Control System.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Instrument Cluster.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Relationship between Wiring Harnesses and Connector Connection Number Chart.

Great Wall Body Electric Apparatus (K5-N2).

BCM.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

Cruise Control System.

1. Introduction of Cruise Function.

Cruise control can help you to maintain the preset speed (no lower than 60 km/h) without the requirement of stepping accelerator pedal. When driving on a straight and smooth highway, this function can be enabled. The function is not recommended to be enabled in urban, winding or slippery roads, and rainy or other bad climatic conditions.

2. Introduction of Cruise Switch.

Great Wall Body Electric Apparatus (K5-N2).

As shown in the figure: “RES/+” refers to the combination button of cruise recovery and acceleration; ’’SET/-” refers to the combination button of cruise setting and deceleration; “CRUISE” refers to main cruise switch button; ’’CANCEL” refers to cruise cancellation button.

3. Cruise Setting.

(a) Accelerate your vehicle to the speed you want to set (the speed must exceed 60 km/h), and press the main switch of cruise control – “CRUISE” button. Then, the cruise indicator in instrument will be illuminated. During cruise, the indicator will always keep on.

(b) Then, press the “SET/-” button on steering wheel while releasing accelerator pedal. The vehicle will run at the speed you set, meanwhile, the set speed will be displayed on the instrument LCD in digital form.

4. Increase of Cruise Speed.

During cruise, the cruise speed can be increased by any of the following methods:

(a) Press the “RES/+” button for a long time (longer than 0.4 s), the cruise speed of vehicle will be increased continuously. When the cruise speed is up to the speed you want, release the “RES/+” button. Then you can cruise at the current speed.

(b) Once press the “RES/+” switch and release immediately (pressing time less than 0.4s), the cruise speed will be increased by 3 km/h.

Increase vehicle speed under cruise mode temporarily:

When vehicle is under cruise mode, if you want to increase vehicle speed temporarily, step down the accelerator pedal to a certain value for speeding up. Speeding up neither affects the operation of cruise system nor changes the set cruise speed. After releasing the accelerator pedal, the speed will return to the set cruise speed.

5. Decrease of Cruise Speed.

Use any of the following operation methods:

(a) Press “SET/-” button for a long time (longer than 0.4s and shorter than 100s), the cruise speed of vehicle will be decreased continuously. When vehicle speed is down to the speed you want, release the “SET/-” button. Then you can cruise at the current speed.

(b) Once press the “SET/-” button and release immediately (pressing time shall be less than 0.4s, and 100s). the cruise speed will be decreased by 3 km/h.

6. Cruise Cancellation.

Any of the following methods can be adopted:

(a) Step down the brake pedal.

(b) Press the “CANCEL” button on steering wheel.

(c) The vehicle speed is lower than 60 km/h or higher than 170 km/h.

(d) Cruise Cancellation Caused by Fault.

(e) Others.

If you want to continue to use cruise control, after the relevant conditions are satisfied (1. vehicle speed is higher than 60 km/h; 2. cruise switch is kept on), press the “RES/+” button on steering wheel, then you will return to the speed when cruise is cancelled for the last time.

7. Cruise Close.

For cruise close, use any of the following operation methods:

(a) Press the ’’CRUISE” button again, and then the cruise indicator on instrument panel will go out.

(b) Turn off the ignition switch.

By either of the above two methods, cruise system can be closed. After close, if you want to restore to cruise mode, you must follow the “Cruise Setting Description” procedure for resetting.

8. Cruise Control Switch Assembly.

(a) Circuit Schematic Diagram.

Great Wall Body Electric Apparatus (K5-N2).

Great Wall Body Electric Apparatus (K5-N2).

(b) Fault Symptom Treatment Index.

Great Wall Body Electric Apparatus (K5-N2).

(c) Cruise Switch Test.

  • Press the RES+ Button to inspect if the resistance value between ECU and the ”3” pin is 910Ω±1% Inspect the R7 patch resistor and 910Ω precise resistor.
  • Press the SET Button to inspect if the resistance value between ECU and the ”3” pin is 220Ω±I% Inspect the R6 patch resistor and 220Ω precise resistor.
  • Press the CRUISE Button to inspect if the resistance value between ECU and the ”5V” pin is 3900Ω±1% Inspect the R8 patch resistor and 3900Ω precise resistor.
  • Press the CANCEL Button to inspect if the resistance value between ECU and the ”3” pin is 0Ω±1% Inspect the R9 patch resistor and 0Ω precise resistor.
  • Inspection of Button Backlighting (Comparing with Sample). The backlighting is a 4.7K general patch resistor. Inspect if luminous intensity and wave length of the light emitting diode are within the same bin.

CD1085.

Panel Function and Electrical Connection Diagram.

Great Wall Body Electric Apparatus (K5-N2).

Description of Buttons.

1. MUTE Button

2. FM Button: FM Band Selection

3. AM Button: AM Band Selection

4. Disc Eject Button

5. CD Button: CD Mode Selection

6. MEDIA Button:

– USB Mode

– AUX Mode

712. Preset Radio Buttons:

Radio Mode:

18 FM radios and 12 AM radios.

CD Mode:

Shortly pressing the ”1” button can realize the function of Repeat Play.

Shortly pressing the ”2” button can realize the function of Random Play.

MP3/USB Mode:

Shortly pressing the ”1” button can realize the function of Repeat Play.

Shortly pressing the ”2” button can realize the function of Random Play.

Shortly pressing the ”5” button can realize the function of Upward Selection of Folder.

Shortly pressing the ”6” button can realize the function of Downward Selection of Folder.

13. AST Button: pressing the button for a long time can help to store radios automatically

14. SCN Button:

Radio Mode: Execute the function of Radio Browse

CD/MP3/USB Mode: Execute the function of Track Browse

15/17. Fast Reverse/Fast Forward Button:

Radio Mode:

Press such keys shortly to execute the functions of Radio Upward/Downward Search

Press such keys for a long time to execute the functions of Manual Radio Search

CD/MP3/USB Mode:

Press such keys shortly to execute the functions of Track Upward/Downward Selection

Press such keys for a long time to execute the functions of Fast Forward/Fast Reverse

16. POWER Button Power Switch and Volume Adjusting

18. EQ Button: Sound Effect Mode Selection

19. SET Button: Sound Source Selection

Definition of Pins.

Great Wall Body Electric Apparatus (K5-N2).

Safety Notice.

1. Precaution.

(a) It can only be used in 12V DC powered system with its negative pole grounded.

(b) When mounting and connecting, it is required to cut off the negative pole of vehicle battery.

(c) When replacing fuse, it is required to ensure that the fuses used are of the same specification. If fuses of a different specification have been used, serious damage may be caused to the player.

(d) Do not try to disassemble the player, as the laser beam in the laser head is harmful to eyes.

(e) Ensure sharp pins and external objects will not be introduced into the player. Otherwise, faults may be caused, or equipment may be endangered, such as electric shock or laser beam exposure.

(f) If your vehicle has been placed under too-hot or too-cold environment for a long time, it is possible that no operation can be conducted until the internal temperature is restored to normal.

(g) Adjust the volume to the position where external alarms, such as horn sound, can be heard.

2. CD Notes.

(a) Playing defective or dusty CD discs may cause incoherent sound.

(b) Do not touch the disc side with no label.

(c) Do not place any sealing strap, label or data protection tab on either side of the disc.

(d) Do not expose CD discs to sunlight or too-hot environment directly.

(e) Use a piece of clean soft cloth to wipe dirty discs from the inside radically out to the edge.

(f) Do not use such solvent as alcohol or gasoline for wiping.

(g) The player cannot play CD discs of 3in. (8cm).

(h) Do not insert CDs of 3in. size or irregular shapes. By doing so, discs may be unable to be ejected, thus causing faults.

3. Before Operation.

(a) Do not set a too-high volume of sound, as too-loud sound may prevent external sound, thus causing traffic accidents.

(b) Before any complex operation, it is required to park the vehicle first.

Specification.

Great Wall Body Electric Apparatus (K5-N2).

Fault and Troubleshooting.

Great Wall Body Electric Apparatus (K5-N2).

DVD109 and DVD110.

Introduction of Panel Button Function and Interface Definition.

Great Wall Body Electric Apparatus (K5-N2).

Button Function.

Great Wall Body Electric Apparatus (K5-N2).

Interface Definition.

Great Wall Body Electric Apparatus (K5-N2).

Notes.

1. Warning.

(a) During driving, do not operate the CD player to avoid dangers due to lack of concentration.

(b) If a long time is required for operating the player, please park the vehicle, as negligence of the above key point may cause traffic accident.

(c) Keep volume to the level at which external noise can be heard, otherwise, traffic accident may occur.

(d) Do not disassemble or remodel, as disassembly and remodeling may cause accidental fire or get an electric shock.

(e) Only the vehicle having 12V voltage battery with negative terminal grounded can be used (if you cannot assure, contact the distributor), otherwise, fire or other accidents may be caused.

(f) Do keep small parts away from children. Once any small part is swallowed by children, go to the hospital immediately.

(g) When replacing fuse, it is required to select fuse of the specifed ampere, otherwise, fire disaster or other accidents may be caused.

(h) Do not block vents or radiating panels, otherwise, fire may be caused due to internal heat concentration.

(i) This product can only be used for vehicles with 12V battery. If this product is used in regions other than its design region, fire, electric shock or other dangers may be caused.

(j) Do not insert your hands, figures or other foreign objects into the disc inlet or any gap, otherwise, personal injury or equipment damage may be caused.

2. Notes.

(a) This player is only applicable for standard 12cm discs.

(b) Do not insert broken, deformed or damaged discs, as playing damaged discs may cause serious damage to the player.

(c) When the player is powered off, it is forbidden to insert disc forcibly.

(d) Only round discs, rather than other special shaped discs, can be used for this player, otherwise, the player may be damaged.

(e) Do not mount the player at positions with direct sunlight, high humility, much dust or obvious vibration, so as to prevent shortening the use life of the player or damaging the player.

(f) Please clean discs timely, as dust and dirt may cause player performing discontinuous sound.

Product Specification.

Great Wall Body Electric Apparatus (K5-N2).

Performance Parameters.

Great Wall Body Electric Apparatus (K5-N2).

Fault and Troubleshooting.

Great Wall Body Electric Apparatus (K5-N2).

DVD111.

Introduction of Panel Button Function and Interface Definition.

Great Wall Body Electric Apparatus (K5-N2).

Button Function.

NAVI: Enter Navigation System

SD/МАР: Navigation Card Position

Other buttons are similar to DVD 109 and DVD 110.

Interface Definition.

Similar to DVD 109 and DVD 110.

Notes.

1. Navigation System.

(a) Navigation system is only used for auxiliary tips in driving process, please use this system on the basis of following actual traffic rules.

(b) Due to traffic construction development, navigation electronic map data may be inconsistent with the actual road traffic directions, your shall drive on the basis of the actual road traffic directions. Also, update the map data promptly.

(c) During driving, watching or operating the navigator may cause traffic accidents. Please operate the navigator when parking.

(d) The map data only covers Mainland China, excluding Hong Kong, Macao and Taiwan.

(e) The national and provincial boundaries are indicative presentations, which are not the basis for dividing.

(f) As the product is updated continuously, actual operation steps may not totally in accordance with this instruction, subject to the actual operation.

(g) Navigation system setting has speed locking function. After speed exceeds a certain limit, part of functions will be forbidden.

(h) After the product is discarded, please properly dispose it to avoid pollution.

(i) After the navigator has started, a certain period is required for satellite antenna to capture and trace satellites. In this period, no signal will be shown, which is considered to be normal. As long as waiting for a while, normal working state will appear.

(j) GPS signal is weak signal. When obstacles, such as elevated road or buildings, appear above GPS antenna or vehicle is in a tunnel, it may be impossible to receive GPS signal. If the ”GPS” characters on the map interface are red, it represents that GPS signal is poorly received.

(k) The system identifies the current position of vehicle by using GPS information, various sensors, road map and other data. However, as GPS satellite is managed by United States Department of Defense, who may reduce the positioning accuracy intentionally in some conditions, thus causing the vehicle position sign deviating from its correct position. When several signal paths occur due to building reflection, positioning error may also increase, and the vehicle position sign may also deviate from its correct position. When precision status of wave lauched by man-made satellite is with bad status, or waves lauched by only two or less man-made satellite can be received, positioning error may also be generated, causing the vehicle position sign deviating from its correct position.

2. Other Parts.

Notes are similar to DVD 109 and DVD 110.

Product Specification.

Similar to DVD 109 and DVD 110.

Performance Parameters.

Similar to DVD 109 and DVD 110.

Fault and Troubleshooting.

Similar to DVD 109 and DVD 110.

Поделиться ссылкой:

Электросхемы