Great Wall Body Electric Apparatus (2011).
Great Wall Body Electric Apparatus (2011).
Перейти к разделу:
Function Chart for Numbered Pins of Intermediate Connection of Wiring Harness.
Electrical Diagram of Folding Rearview Mirror.
Function Chart for Numbered Pins of Intermediate Connection of Wiring Harness.
[4G69 Engine (on the basis of the left hand drive of body electric apparatus K5-4G69 )].
[4D20 Engine (on the basis of the body electric apparatus K5-N2)].
Electrical Diagram of Folding Rearview Mirror.
Fault Symptom Table.
Tips:
Fault causes can be determined through the table below. In the “Suspicious Position” column of this table, fault causes are listed on the basis of degree of possibility. It is possible to check all symptoms by inspecting the suspicious positions in the listed order. Replace components when necessary.
Element Diagram.
Removal of Rearview Mirror Assembly.
1. Insert the clip driver into the clearance between the retaining clip and the outside rearview mirror triangle, and pry and loosen it.
Note: before using the clip driver, its head must be wrapped by tape.
2. Remove the outside rearview mirror triangle.
3. Remove the three self scrap removal hexagon flange nuts, and disconnect the electric heating defrost connector.
4. Remove the outside rearview mirror.
Mounting of Rearview Mirror Assembly.
The mounting order is opposite to the removal order.