Схемы электрооборудования Chery QQ (Chery S11) (English).
Схемы электрооборудования автомобилей Chery QQ (Chery S11) (English).
Перейти к:
Division and match of QQ remote controls.
Explaination of reading diagram.
1. Main circuit board number of relay box.
30: No fuse, come from the battery directly
30a: Pass the fuse (A), to the relay box in the instrument
15:Directly to the ignition switch
15a: Directly to the ignition switch, cut off when it start
Ka: Radio, cigarette lighter, wiper
2. Distributing point of grouding (there is 10 position).
1. Engine compartment harness ground on the left front side member.
2. Engine compartment harness ground on the right front side member.
3. ECU harness ground under the battery.
4. ECU harness ground on the starter.
5. ABS harness ground under the battery.
6. Instrument panel harness ground under the relay box.
7. Car body harness ground under the shift handle.
8. Car body harness ground on the left C pillar.
9. Car body harness ground on the right C pillar.
10. Ground itself.
3. Insert part explaination:
For example: ECU A/8 means ECU harness plug A (connect with instrument) pin 8.
4. Lead colour and the area of lead cross section (square mm).
W – white; B – black; L – blue; Gy – gray; P – pink; Y – yellow; O – orange; G – green; Br – brown; R – red; V – violet.
Engine compartment relay box.
Explanation:
F – 1ECU; F2 – fan; F3 – ABS; F4 – horn; F5 – headlight;t F6 – mian relay; F7 – front foglight; F8 – rear foglight; F9 – left small lamp; F10 – right small lamp; F11 – left low beam; F12 – right low beam; F13 – left high beam; F14 – right high beam; F15 – defroster; F16 – blower; F17 – backup lamp, odometer sensor; F18 – ABS; F19 – ignition coil.
Dashboard relay box.
Connector of ECU.
ECU A (The connector of ECU harness and engine compartment harness).
ECU B (The connector of ECU harness and instrument harness).
465 ECU connector.
372 ECU connector.
Connector (on the vehicle body harness).
A (connector of vehicle body harness and instrument harness).
B (connector of vehicle body harness and instrument harness).
C (connector of vehicle body harness and instrument harness).
Connector (vehicle body harness).
left door A (connector of vehicle body harness and left front door harness).
right door A (connector of vehicle body harness and right front door harness).
left door B (connector of vehicle body harness and left front door harness).
right door B(connector of vehicle body harness and right front door harness).
front A (red) (connector of vehicle body harness and engine compartment harness).
Start and charge system.
A/C and defroster system (465 system).
A/C and defroster system (372 system).
Front and rear wiper.
Radio.
ABS control system.
Electric rearview mirror.
Horn, backup lamp, cigarette lighter, ceiling lamp, luggage compartment light.
Turn signal Light system.
Head Light (Contain Electric Head light), Froglight.
Instrument.
Anti-theft, Power Window and Central locking.
465 Electrical Injection System (M154 System of Uninted Electronics).
372 Electrical Injection System (Siments System).
Airbag.
Explanation of read diagram.
1. relay box main circuit board number.
30:No fuse, from battery directly.
30a: Via fuse (A), to dashboard relay box.
15:From ignition switch directly.
15a: From ignition switch directly, disconnect when start the engine.
Ka: Radio.
2. Explanation of connector.
For example: instrument 1/9 means ECU harness and instrument harness 1# connector, number 9 terminal.
3. Wire colour and cross section area (squar mm).
Engine compartment relay box.
F0 – Electric fan; F1 – Main fan; F2 – Front fog lamp; F3 – TCU; F4 – Fuel pump; F5 – ECU; F6 – Oxygen heating; F7 – Fan relay coil; F8 – Fuel pump relay coil; F9 – Left low beam; F10 – Right low beam; F11 – Left high beam; F12 – Right high beam; F13 – Left small lamp; F14 – Right small lamp; F15 – Defroster; F16 – Blower.
Dashboard relay box.
F17 – A/C compressor; F18 – Rear fog lamp; F19 – Horn; F20 – Small lamp; F21 – Shift mechanism oil pump; F22 – Ceiling lamp; F23 – Double jump (alarm lamp); F24 – Brake switch; F25 – Brake switch; F26 – Electric rear view mirror; F27 – Instrument; F28 – Reverse lamp; F29 – ABS; F30 – TCU; F31 – Air bag; F32 – Turn signal lamp; F33 – Anti-theft module; F34 – Starter; F35 – Radio; F36 – Cigarette lighter; F37 – Wiper; F38 – Wiper.
ECU harness, instrument harness, vehicle body harness, engine compartment harness connector.
1 (ECU harness and instrument harness connector).
2 (ECU harness and instrument harness connector).
3 (vehicle body harness and instrument harness connector).
4 (vehicle body harness and instrument harness connector).
Front 1 (ECU harness and engine compartment harness connector).
Front 2 (instrument harness and engine compartment harness connector).
Front 3 (instrument harness and engine compartment harness connector).
Front 3 (instrument harness and engine compartment harness connector).
Front 3 (instrument harness and engine compartment harness connector).
Vehicle body harness and door harness connector.
Left front A (vehicle body harness and left front door harness connector).
Left front B (vehicle body harness and left front door harness connector).
Right front A (vehicle body harness and right front door harness connector).
Right front B (vehicle body harness and right front door harness connector).
Left rear A (vehicle body harness and left rear door harness connector).
Left rear B (vehicle body harness and left rear door harness connector).
Right rear A (vehicle body harness and right rear door harness connector).
Right rear B (vehicle body harness and right rear door harness connector).
Start and charge system.
ABS control system.
Electric rear view mirror.
Front and rear wiper.
Radio.
Air bag.
A/C and defroster system (AMT system).
AMT engine system (Marelli AMT system).
AMT transmission system (Marelli AMT system).
Anti-theft, window regulator and central lock.
Instrument system.
Lighting and horn system.
Division and match of QQ remote controls.
QQ remote controls features two brands and three modules.
I. 9CG, two modules.
1. Module 1.
(Electrical parts and relay are set on the same side in the module. It has a small lock of remote control with projected mark, a red seal circle, and two batteries. )
2. Module 2.
(Electrical parts and relay are set on different sides in the module. It has a small lock of remote control with projected mark, a black seal circle, and two batteries).
II. 9AK, one module.
(Electrical parts and relay are set on different sides in the module. It has a small lock of remote control with dented mark, a black seal circle, and three batteries).
III. Match methods.
1. 9CG match methods.
1) Turn ignition switch on three times within 7 seconds. Upon the third time (switch on), observe the antitheft indicator.
2) Antitheft indicator will flash three seconds, pause 1 second, and then light up again. Wait until it extinguishes and turn down ignition switch.
3) Turn ignition switch on again, and then press any key of remote control; meanwhile antitheft indicator will flash once. This indicates this remote control has entered into the system.
Note: The first remote control is set into the system After Step 3). Following that, press any key of the second remote control to set it into the system. Many service stations only operate one remote control hereto. So, another control doesn’t work after setting. Furthermore, the settings will definitely fail in case of improper process or operation. In this case, do not replace remote control or module casually. Be advised to try again strictly according to this operation process. Operate as in the figure below.
Operation process: